VOLOHAS 60/65-6.9 Replacement Wheels Solid Rubber Tyres 10 Inch Solid Tyres for Ninebot Max G2 G2D G2E G65 Electric Scooter Front/Rear Replacement Tyres Solid Tyres Non-Slip Puncture Proof (Blue, Pack

Price: AED177.91
(as of Jan 08, 2025 15:25:32 UTC – Details)

STEP 1
Heat softening tyres
Before installation, you need to put the solid tyre in boiling water for about 10-15 minutes to soften it. Then the tyre becomes more flexible and malleable, which makes bending and mounting easier.
Please note:
This is the key to easy installation, and of course you can also use a microwave for this purpose.
STEP 2
Add soapy water or Vaseline
Cover the rim and the inside of the tyre with soapy water or petroleum jelly. This makes the solid tyre glides more easily in the rim.
Attention:
Please avoid using petrol or lubricating oil, otherwise the tyre will be damaged. It is also dangerous to use greasy or oily material. In case of emergency braking, the tyre can slip and rotate on the wheel.
STEP 3
Confirm Direction
Check the direction of rotation of the tyre before installing it. The lines of the tyre must face the front of the scooter. This is important as the beads of the tyre are used to drain water properly when driving on wet surfaces.
Friendly tips:
If you mount it in reverse, you lose grip and increase the risk of slipping.
STEP 4
Install with tyre lever.
Place the rim on the floor and place the tyre on the rim. Place the sides of the rim on the inside of the tyre. Then place both feet on the edge to prevent slipping. Slide the tyre lever between the rim and tyre until the smooth tyre slides up and sits in the rim.
Note:
Proper installation can help our scooter tires perform better and protect you during use.
Card slot 44 mm: 60/65-6.9 replacement tyres front or rear specially designed for 10 inch electric scooter for Ninebot Max G2 G2D G2E G65. The 60/65-6.9 scooter off-road solid tyre is suitable for replacing tyres with an inner diameter of 160 mm.
Better driving experience: our tyres use a scientific hollow honeycomb and non-slip strip design, so that the tyre has higher slip resistance, shock absorption, permeability resistance and durability to achieve a better driving experience. More energy efficient than conventional solid rubber tyres.
Highest safety: the deeper tread pattern and the wider profile size give the tyre more grip and cushioning. Even in rain or snow, the scooter is easier to control and offers you maximum safety. Battery life is 5-6 kilometers longer than other products of the same size.
No inflation required: a solid wheel made of natural rubber retains rolling flexibility. No inflation is required, avoid the risk of tyre explosion and inflation problem. Tip: installation requires experience, skill, strength. Installing solid tyres can be a little difficult for first-time fitters.
Please soften before installation: place it in boiling water for 10 minutes before installation to soften it. We recommend that you watch the corresponding assembly video on YouTube first. Proper installation can help our scooter tires perform better and protect you during use.